Triple Screen Racing Sim Setup with SIM GT-Racer 290

By Logitechmalls | Published: 2026-10-28

Category: How-to Guides

Learn how to set up a triple screen racing sim with the SIM GT-Racer 290 cockpit. Step-by-step guide for monitor placement, alignment, and configuration.

Quick Answer

To set up a triple screen racing sim with the SIM GT-Racer 290, focus on stable monitor mounting, correct angle and height alignment, and consistent bezel compensation in your sim software.

Why Triple Screens Enhance Sim Racing

Triple screens give you a wider field of view, letting you see corners and rivals earlier than a single monitor. This improves your lap times and makes the experience more immersive.

The SIM GT-Racer 290 cockpit provides a sturdy frame that can support a triple monitor setup, but you still need to mount the monitors securely and align them properly to avoid distortion.

Monitor Choice and Mounting Considerations

Choose monitors with thin bezels to minimize the gap between screens. Aim for identical models to ensure consistent color and brightness.

The SIM GT-Racer 290 is designed to work with a variety of racing wheels and pedals, but it does not include monitor mounts. You will need a separate triple monitor stand or desk mount that can hold the weight of your screens.

Step-by-Step Triple Screen Setup

Prepare the cockpit and workspace: Place the SIM GT-Racer 290 on a level surface and ensure the seat and wheel mount are adjusted to your driving position. Measure the space where the monitors will go to confirm the stand fits. Check that the monitor stand can support the combined weight of your three monitors.
Mount the side monitors at the correct angle: Position the left and right monitors at about 60 degrees from the center monitor. This angle matches the typical field of view in sim racing and reduces image distortion. Use a protractor or angle finder to keep the side screens symmetrical.
Align the monitors for height and eye level: Set the center of each monitor at your eye level when seated in the cockpit. The top edges should form a straight line so the image flows continuously across all three screens. Adjust the monitor stand height before tightening everything down.
Connect the monitors to your PC: Plug each monitor into your graphics card using the correct cables (DisplayPort or HDMI). Make sure your GPU supports three outputs and can handle the combined resolution. Check your graphics card ports before buying cables.
Configure the display settings in Windows: Right-click the desktop and open Display Settings. Arrange the monitors to match their physical layout: center monitor in the middle, side monitors to the left and right. Set the resolution and refresh rate for each screen. Drag the monitor icons to match your actual setup to avoid cursor confusion.
Set up bezel compensation in your sim software: In your racing game, enable triple screen mode and enter the bezel width of your monitors. Adjust the field of view (FOV) to match the physical angle and distance from your eyes to the screens. Use an online FOV calculator for your specific monitor size and seating distance.

Product Facts

SIM GT-Racer 290 - Black: The SIM GT-Racer 290 in Black is a driving simulator cockpit with a robust frame to support realistic racing sessions. The sturdy construction provides a stable base for your racing wheel and pedals, which is essential when you add the extra visual immersion of triple screens.
SIM GT-Racer 290 - Black