How to Upgrade Your Racing Sim with a Clutch Module
By Logitechmalls | Published: 2026-10-27
Category: How-to Guides
Add realistic clutch control to your sim racing setup with a dedicated clutch module. Follow these steps to install and configure it for immersive gear shifting.
Quick Answer
Adding a dedicated clutch module like the RS Clutch Module gives you precise, tactile control for realistic gear shifting in sim racing. This guide walks you through mounting, connecting, and calibrating it with your existing pedal set.
Why a Dedicated Clutch Module Matters
Many entry-level pedal sets lack a clutch pedal, forcing you to use paddle shifters or auto-clutch. A standalone clutch module adds the third pedal for manual transmission simulation, giving you heel-toe downshifts and clutch kick techniques that improve lap times and immersion.
The RS Clutch Module is designed as a standalone unit that complements most racing rigs. Its black finish blends with common aluminum profile or steel cockpits, and the tactile feedback helps you feel the bite point—critical for consistent launches and smooth shifts.
What to Check Before You Buy
Ensure your racing wheel base or pedal set has an available input port for an extra pedal. Some USB pedal sets allow daisy-chaining, while others require a separate USB adapter. The RS Clutch Module connects via standard RJ12 or 3.5 mm jack—verify compatibility with your current hardware.
Also measure the mounting space on your rig. The module has a standard pedal plate footprint, but if your rig uses a non-adjustable pedal tray, you may need a mounting bracket or adapter plate.
How to Install and Configure Your Clutch Module
- Mount the Module to Your Rig: Position the clutch module on your pedal tray or rig frame so it sits comfortably to the left of your brake pedal. Use the included bolts or your rig's T-nuts to secure it firmly. Common mistake: mounting it too far away, causing you to stretch your leg during long sessions. Sit in your driving position and adjust the pedal angle before tightening fully.
- Connect the Cable to Your Wheel Base or Pedal Set: Plug the clutch module's cable into the designated clutch or accessory port on your wheel base or pedal control box. If your system uses a USB connection, connect the module directly to your PC and let Windows or your console detect it. Common mistake: plugging into the wrong port (e.g., throttle or brake), which maps the clutch as an accelerator. Check your hardware manual to confirm which port is labeled 'CLUTCH' or 'PEDAL 3'.
- Calibrate the Clutch in Your Sim Racing Software: Open the control panel or settings menu in your sim (e.g., iRacing, Assetto Corsa, rFactor 2). Locate the pedal calibration section, depress the clutch fully, then release it to set the range. Enable 'manual clutch' or 'clutch assist off' to force the game to use the physical pedal. Common mistake: leaving the clutch assist on, which overrides your input and defeats the purpose of the upgrade. Test the bite point by slowly releasing the clutch in a stationary car—the revs should drop smoothly as the clutch engages.
Product Spotlight
- RS Clutch Module - Black: The RS Clutch Module in Black is a dedicated driving component designed for realistic simulation experiences, offering a precise and responsive clutch action. It gives you a physical clutch pedal with tactile feedback, so you can feel the engagement point and execute realistic gear changes without relying on auto-clutch assists.
RS Clutch Module - Black
